Sensor Setting; Reverse Switch - devention Scout X4 Quick Start Manual And Systems Flowchart

12.7 Sensor Setting
Sensor Setting
Model Menu
UP/DN
Sensor Setting
ENT
Status Active
No Signal
Inhibit
Press R or L to select "Active".
Sensor Submenu
Voltage
Temperature
GPS Setting
(1) Voltage Setting
Press UP or DN to select Voltage in the Sensor Setting. Press ENT to enter Voltage interface.
Voltage
Internal: VO Inhibit
External: V1 Active
ZEM
External: V2 Inhibit
Internal shows the Radio battery voltage.
External shows the aircraft battery voltage.
Scout X4 default setting is 21.4V, please fly back the copter when you get a warning asap.
(2) GPS Receive Setting
Press UP or DN to select GPS setting on the Sensor Setting interface, then press ENT to enter GPS Setting interface.
GPS Setting
Altitude Type Relative
Speed Unit Km/h
Date Type DD-MM-YY
Time Zone UTC+08:00
(2.1) Altitude Type setting:
Press R or L to select Absolute or Relative.
(2.2) Speed Unit setting:
Press R or L to select Km/h or Knote.
(2.3) Date Type setting:
Press R or L to select DD-MM-YY\ MM-DD-YY\ YY-MM-DD.
(2.4) Time Zone:
Press R or L to select Time Zone, then press EXT to return "Main Menu".
12.8 Reverse Switch
Main Menu
UP/DN
Function Menu
UP/DN
Reverse Switch
ENT
The factory default Settings interface as piture.
ENT
ENT
Reverse Switch Reverse Switch
4
Elevator AUX4 Normal Normal
Aileron Normal AUX5 Normal
Throttle Normal AUX6 Normal
Rudder Normal AUX7 Normal
Press EXT to return back "Function Menu"
Gear Normal
Flap Normal
after finished.
AUX2 Normal
AUX3 Normal
• 9 •