Installing The Propellers - devention Scout X4 Quick Start Manual And Systems Flowchart

Q • 0
Q • 0
M3
M4
M2
))
2.1.6 After the successful binding
place the aircraft on a stable surface.
1.0 Installing the Propellers
1.1 Prepare forward propeller
(Clockwise arrow mark), counter
propeller (counterclockwise
arrow mark )
1.2 Match the arrows on the
propellers to the arrows on the
arm next to each motor. Screw
each propeller onto the motor,
secure by hand, no need for tools.
1.3 Prepellers assembled
(assembled skid landing)
1.4 Prepellers assembled
(unassemble skid landing)
store or as bl the skid landing/binding the radio
2.1 Skid landing assembled(restoration/code binding)
The Landing gear is shipped in the retracted position. DO NOT try to extend the landing gear by pulling on it.
We will deploy the landing-gear the first time the system is powered, please follow these instructions carefully
Powr indicator
1:11111
Power switch a we
r button
0.
11.. 1,
.Its;
2.1.1 Install the fully charged
battery DO NOT turn on the
battery until later.
*Please check the charger
manual for charging instructions
2.1.2 Turn X4 on its back. The
belly and the retractable legs
should now be facing up.
MAKE SURE nothing is blocking
the legs.
2.1.3 Put all function switches
to 0 pisition, put all trims/knobs
on Mid pisition, move the throttle
to the lowest position, then turn
on the radio power.
2.1.4 Turn the power switch to
"ON" position, and press on the
power button about 3-5 second
till the red LED light solid. The
undercarriage(skid landing) will
unfold automatically.
2.1.5 Turn the aircraft to its
UP-right position.The Red LED
flashing will stop shortly.When it
stops, the DEVO F12E and the X4
have successfully connected to each other.
* This process is called "ID binding"
2.2 Skid landing unassembled(assemle skid landing/code binding)
L
1
-maw
Skid landing I I Skid landing
module A module B
ee.v
er
5-
•
2.2.1 Prepare two skid landing, 2.2.2 Put the skid landing into 2.2.3 Install the skid landing 2.2.4 Skid landing installation
skid landing module A/B, 4pcs the skid landing position. module, and screw down the
finished.
M2.5X20 screws. M2.5X20 screw to fix skid landing.
• 1 •