devention Scout X4 Quick Start Manual And Systems Flowchart page 15

Power button
g;;t 1 ';4-Power switch
I
I I 14-Power indicator
16.4 Video and Photo user guide
Warm tips:
(1) Micro SD card must be inserted to the iLook+ camera before connecting the power, and took off after disconnecting the power.
(Recommend to use high speed SD card)
(2) Insert MICRO SD card, the camera is powered on, the red indicator light indicates the camera is initialized, the red light goes out indicates the
camera enters standby mode initialization is complete.
(3) Insert MICRO SD card, the camera is powered on, if the red indicator light blinks rapidly means formatting it is necessary.pls stir video/ photo
switch to a position press shutter last for 5 sec.format after the completion of the proposed re-energized camera.
(1) Video instruction
(1.1) Radio Operation
Switch
Transmitter
setting
Instructions
Model Menu
(1) It's a must to turn the switch of iLook+ to "
a
"
position.
/
(2) Start video: turn the AILE D/R switch from "0" position to "1" position, wait for 1-2 seconds, then return
Device Output
to "0" position, the camera will start to video (the red indicator keeps flash with an interval of 0.5 second).
/
The red indication of video status can be seen on the transmitter.
AILE D/R
AUX7
Stop video: turn the AILE D/R switch from "0" position to"1" position, wait for 1-2 seconds, then return
4' to "0" position, the camera will stop video (the red indicator lights out). And the red indication of video
AILE D/R
status can not be seen on the transmitter.
Active
(3) Make sure that the video recorded will not be saved in the SD card if you haven't finished
the "stop video" operation.
(1.2) Manual Operation
Turn the Video/Photo Swich to
U
first please, press the shutter button once, iLook+ camera starts to Video(the Red indicator flash for 0.5sec
interval); Press the shutter button again, iLook+ camera stops video(The Red indicator light out).
(2) Photo instruction
Please Turn the video/photo switch to Ci, Press the shutter button once, iLook camera Will take a photo (The Red indicator blinks once then light
out), press the shutter button again, it will take another photo.
17.0 Conne charger instructio
Slide the power switch to "ON" position when charging, press the power button for 3-5 seconds till the power indicator keeps on.
For details, please refer to iMAX B6 user manual.
• 14 •