Motorola V120x Instruction Manual page 27

Disassembly Procedure
120X
Display Removal:
The elastomeric on the display makes contact
with the power contacts on the PCB. The two
locating pins on the display are aligned and the
four holding tabs are grabbing the board. Make
sure you release the tabs and gently lift the
display. Once you free the tabs on one side, the
other side comes off easily.
Pads On
The PCB
Holes For
Display
Caution: To prevent over bending the display
latches, keep fingerprints off the display viewing
area.
Keypad Removal:
Remove the keypad from the front housing as
shown.
Speaker Removal:
There is a adhesive backing to the speaker, hence
make sure you pry the speaker open by the help
of a bezel stick.
27 1/15/02