How To Level The Base In The Vehicle - Peg-Perego PRIMO VIAGGIO 4.35 Owner's Manual

How to level the base in the vehicle

Take the car seat off the base. Rotate
the handle in the upright position by
pressing the buttons on the side of
the handle (a). Place your hand on the
top of the seat back and pull up on
the release lever with your fingers. Pull
the car seat up at the same time (b).
Note: Pulling near the center of the lever
provides the easiest release.
Turn the knob left or right to adjust the
base foot (c).
Make sure that your vehicle is parked
on level ground. Position the base rear
facing in the back seat of your vehicle.
Check the level indicator on the top surface
of the base and further rotate the knob
to make sure that you reach the proper
angle (d). Follow the visual instructions
placed on the side of the indicator in
order to set the angle corresponding to
the weight of your child.
- 25 -