Installing Your Child Restraint In A Vehicle; Vehicle Attachment Design And Compatibility - Peg-Perego Primo Vaggio SIP 5-70 convertible Instructions For Use Manual

Installing your child restraint in the vehicle
VEHICLE ATTACHMENT DESIGNS
RF
AND COMPATIBILITY
Primo Viaggio SIP Convertible is designed
to be installed in a vehicle in Rear Facing
mode (RF) or in Forward Facing mode (FF).
It can be installed using:
1) Latch System
2) Vehicle Seatbelts
3) Additionally your seat is equipped with a
Top Tether to be attached to a suitable Top
REAR FACING
Tether anchorage point. PegPerego always
FF
recommends use of a Top Tether to increase
safety and stability of the child seat.
Details are described in the following pages.
Peg Perego recommends that caregivers
have their car seat installation checked by a
certified child passenger safety technician.
These technicians are trained for this specific
purpose and are available in your area. To
locate a technician go to the website at
http://www.nhtsa.gov/cps/cpsfitting/index.cfm
FORWARD FACING
- 13 -