Assembly Before First Use - Peg-Perego PRIMO VIAGGIO 4.35 Owner's Manual

Assembly before first use

Primo Viaggio 4 . 35 is almost ready for use.
Disconnect the car seat from the base
x
following instructions at page 25.
Snap fit the anti-rebound bar into the
base as shown in the picture.
Check that the bar is properly installed by
pulling on top of it trying to detach the
bar from the base.
IMPORTANT NOTE: the anti rebound bar
provides extra protection in case of a
rear collision or during the movement of
the seat in a crash. Always assemble it
properly.
In case, the anti rebound bar can be
removed by pressing the buttons located
inside each latch connector storage
housing.
- 13 -