Adjusting the subwoofer level
You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.
SUB W 1
SUBWOOFER
^---------------------------------------------------}
LEVEL
-CH SELECT
≥ To check the current setting, press [SUBWOOFER LEVEL].
≥ The setting you make is retained, and recalled every time you play the
same type of source.
Using Subwoofer Boost
Main unit only
You can enhance the subwoofer effect with strong bass.
BST ON,------.BST OFF
SW BOOST indicator
The SW BOOST indicator lights when
SW
BOOST
Subwoofer Boost is turned on.
#
#
SUB W 2
SUB W 3
Adjusting the speaker level
You can adjust the surround sound levels.
Preparation
≥ Press [i, ` VOL] to adjust the volume to normal listening level.
≥ Select "TEST TONE" from "SPEAKER SETTINGS" in "AUDIO" menu
(➜ 22).
1
Enter test tone mode.
OK
e.g.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
OK
RIGHT, SURROUND LEFT)
`6 dB to i6 dB
≥ To exit the screen, press [SETUP].
∫ To adjust speaker level during play
(Effective when playing 5.1-channel sound or when Dolby Pro
Logic II is on.)
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L #C #R #RS #LS #SW
^----------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "ÎPLII" is not lit.
2 Press [3] (increase) or [4] (decrease) to adjust the speaker
level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [2, 1].
AUDIO - SPEAKER SETTINGS - TEST TONE
SPEAKERS
TRIM LEVEL
LEFT
− −
CENTER
0dB
RIGHT
− −
SURROUND RIGHT
0dB
SURROUND LEFT
0dB
SET
RETURN
EXIT : SETUP
29
29