Step 1 Assembling The Front Speakers - Panasonic SC-PT465 Operating Instructions Manual

1
step
Assembling the front speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ For optional wall mount, refer to page 6.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
(with cover plate)
Position the
cable between
the ridges.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
4
4
2 Stands
(with cable)
Tighten securely.
Cover plate
Remove using a flat
object.
≥ Keep for wall-mount
use (➜ 6).
2 Bases
Slide into the groove.
Insert the wire fully.
i: White
j: Blue
Push!
6
Press into the groove.
Tighten securely.
String (not included)
Thread from the wall to the speaker and tie tightly.
Screw eye
Rear of the speaker
(not included)
8 Screws
Approx.
150 mm
Wall