Removal Of Four-Way Valve - Daikin FTK25JVE9 Service Manual

For RK25J, RK35J, RX25J, RX35J
2.7

Removal of Four-way Valve

Procedure
disassembling work.
Step
1. To remove the parts
around the four-way valve.
Remove the terminal
1
cover, the lead wires of
the compressor and the
partition plate so as not
to be burnt out by a gas
brazing machine.
Remove the thermister
2
for the heat exchanger.
Remove the four-way
3
valve's coil.
132
Warning Be sure to turn off all power supplies at least 10 min. before
Procedure
Si04-115
Points
"
The thermister for heat
exchanger is fixed by a tie-
lap at one portion. Be sure to
fix the thermister on the
original position when
restoring.
Warning!
Ventilate when refrigerant
leaks during the work.
(If refrigerant contacts fire, it
will cause to arise toxic gas).
"
Pay attention so as not to
loose the retainer for the
thermister.
Removal Procedure