Removal Of Bell Mouth And Left Side Plate - Daikin FTK25JVE9 Service Manual

Si04-115
2.2

Removal of Bell mouth and Left Side Plate

Procedure
disassembling work.
Step
The bell mouth is
1
attached to the front
plate with two screws
and four hooks.
Remove the two screws
2
and undo the four
hooks to release the
bell mouth.
Removal Procedure
Warning Be sure to turn off all power supplies at least 10 min. before
Procedure
For RK25J, RK35J, RX25J, RX35J
Points
"
Remove the bell mouth from
the front plate after removing
the two screws which are set
below.
"
Slide the bell mouth in the
arrow direction to disengage
the hook B.
119