For RK25J, RK35J, RX25J, RX35J
2.3
Removal of PC Board and Switch Box
Procedure
disassembling work.
Step
1. Remove the shelter.
Undo the five hooks
1
and remove the shelter.
2. Remove the printed circuit
board.
Disconnect the ground
1
wire.
120
Warning
Be sure to turn off all power supplies at least 10 min. before
Procedure
Si04-115
Points
"
The shelter has five hooks.
"
Be sure to avoid forgetting to
restore the shelter and to
avoid loosing or damaging it.
Removal Procedure