Instruction
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase your
comfort.
Adjusting the
horizontal blade (flap)
Press
while the air conditioner is
SWING
operating.
l
Every time the button is pressed, "
.......
ON
.......
ON
Notes on flap angles
l
When
SWING
is selected, the flap swinging range depends
on the operation mode. (See the figure.)
l
The real flap angles are differ from the display of remote
controller.
In DRY mode or COOL mode
When stop operation
Upper limit in cooling
Lower limit in cooling
When stop operation
Upper limit in heating
Lower limit in heating
ATTENTION
l
Always use a remote controller to adjust the flap angle. If
you attempt to move it forcibly with hand when it is
swinging, the mechanism may be broken.
10
50
" appears or disappears.
The flap automatically
swings up and down.
To stop the flap at an
SWING
angle you like, press
0˚
25˚
In HEAT or FAN mode
20˚
45˚
Adjusting the louvre
Hold the knob and move the louvre.
(You will find a knob on the left-side and the right-side
blades.)
ATTENTION
.
l
Be careful when adjusting the louvre. Inside the air
outlet, a fan is rotating at a high speed.
Si04-115
(R1932)
System Configuration