MINI DOME CAMERA INSTRUCTION MANUAL Colour High Resolution ZC-D3024PHA ZC-D3210PHA Black & White High Resolution ZC-D3024CHA ZC-D3210CHA EG-1 Page 1 03.10.8, 0:14 PM...
Thank you for your purchase of this product. Before operating the product, please supply marked class 2. read this instruction manual carefully to ensure proper use of the product. Please (2) To prevent fire or electrical shock, UL listed class 2 wiring should be used for the store this instruction manual in a safe place for future reference.
PARTS DESCRIPTION • Exterior Inner cover • Camera body interior Camera body View angle Focus adjustment adjustment lever lever Camera Lens Line phase adjustment Dome cover volume Body cover Coaxial Power video cable input Video output terminal • Accessories connector for service monitor cable switch...
INSTALLATION & ADJUSTMENT Creating a Hole in the Ceiling or Wall Connecting the Cables Make two holes for the screws affixing the camera body, and one hole for the Please refer to the diagrams below. ① Connect the video cable from monitor to the equipped video cable. power and video cables.
Page 5
Attaching the Service Monitor Adjusting the View Angle, Focus and Iris When adjusting the camera direction, view angle and focus, use the included Use the lever to adjust the view angle and focus. service monitor cable by connecting to the video output connector View angle adjustment lever (Lock screw) •...
Page 6
DIP Switch Set Up Set according to lighting conditions. Attention: DO NOT change “FIX” switch position from the factory setting. ZC-D3024PHA/ZC-D3210PHA (Colour) Do not change the switch position from the factory setting. Shutter speed to be fixed at 1/120. Flickerless...
Page 7
Line Phase Adjustment Completing the Adjustment and Installation (24V AC 50Hz, Line Lock mode) ① Attach the body cover. ② Attach the dome cover. If necessary, turn the volume to adjust the line phase. DC Iris Level Adjustment Set according to lighting conditions. If necessary, turn the volume to adjust the DC iris level.