Section 8 − Gmaw/Fcaw Operation; Typical Connection For Remote Control Feeder Gmaw/Fcaw Process - Miller XMT 350 CC/CV Auto-Line Owner's Manual

SECTION 8 − GMAW/FCAW OPERATION

8-1. Typical Connection For Remote Control Feeder GMAW/FCAW Process

1
2
3
4
5
!
Turn off power before making
connections.
1 Remote 14-Receptacle
2 Positive (+) Weld Output Terminal
3 Negative (−) Weld Output Terminal
4 Ground Cable to Workpiece
OM-2247 Page 32
7
6
5 Workpiece
6 Gun
7 Wire Feeder
8 Gas Hose
9 Gas Cylinder
9
8
Use of shielding gas is dependant on Wire
Type.
.
The connection diagram illustrates
DCEP (reverse polarity) suitable for all
wires except self-shielded FCAW. The
majority of self-shielded FCAW wires
require DCEN (straight polarity).
264 343-A