Setting Parameters - Denso HC36 II TU-K Operation Manual

5．SETTING PARAMETERS
You may easily set parameters for communications conditions,
readable bar codes, transmission formats and others, by using
bar-coded parameter menus.
Settings made from the bar-coded parameter menus will be retained
even after the PC is turned off.
To scan bar codes given in those bar-coded parameter menus,
press the trigger switch.
◆Beeper Volume Adjustment
You may adjust the beeper volume to three levels--High, Medium,
and Low. The factory default is High.
Scanning the bar code below will cycle through the High, Medium,
and Low.
Adjust beeper volume
◆Other Parameters
Parameters other than the beeper volume may be set according to
the procedure given on the following pages.
13