Setting The Time; Changing The Time; Daily Use - AEG BC3331302 User Manual

Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial
position.

4.2 Setting the time

You must set the time before you
operate the oven.
The indicator for the Time of day
function flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.

4.3 Changing the time

You cannot change the time
of day if the Duration
End

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
or button to set the
function operates.
Press
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
4.4 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1. Set the function
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
maximum temperature.
4. Let the appliance operate for 15
minutes.
5. Set the function
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
or
5.2 Activating and
deactivating the appliance
It depends on the model if
your appliance has knob
symbols, indicators or
lamps:
• The indicator comes on
• The lamp comes on when
• The symbol shows
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
ENGLISH
again and again until the
and the
and the
and the
when the oven heats up.
the appliance operates.
whether the knob
controls the oven
functions or the
temperature.
7