Safety And User Information - AD Klima Fan Coil Unit Operation And Installation Manual

Fan Coil Unit One-Way Cassette Type

1. Safety and User Information

1.1 Safety instructions
The One-Way Cassette fan coil units are developed and manufactured in accordance with the
state-of-the-art technological standards and established technical safety norms and regulations.
The One-Way Cassette fan coil units comply with the Machinery Safety Directive.
The One-Way Cassette fan coil units are reliable and satisfy high quality standards. This product
range combines advanced technology with a high level of user friendliness and ease of
maintenance.
However, all fan coil units inevitably pose residual risks of injury to the user or third parties or
material damage to the unit or other objects. For this reason, you should take into account and
follow all safety instructions. Ignoring these safety instructions is connected with risks to your health
and safety, can lead to the environmental damage and/or extensive material damage.
Observing the safety instructions in the operation manual will help you to avoid risks, ensure
economical operation of the unit and enjoy full benefits of the product.
The safety aspects covered by this chapter are valid for the entire operation manual. To ensure
your own safety consider the following safety instructions.
THE SAFETY INSTRUCTIONS AFTER LABLE
' ' IS CONSIDERED AS WARNING WHICH
MEANS INCORRECT OPERATION MAY RESULT
IN SEVERE CONSEQUENCES OF DEALTH OR
SERIOUS INJURIES!
ELECTRICAL HAZARD!
Before carrying out any work on the unit, power the unit down to avoid injury from electrical current.
Check that the unit is isolated and ensure that the appropriate point of the unit for the on-site
power supply is secured against being switched back on.
DANGER OF SCALDING!
Before performing work on the valves or the inlet or outlet pipes, seal off the heating or cooling
water inlet to prevent scalding. Do not commence work before the heating water has cooled down.
DANGER OF ROTATING UNIT PARTS!
Rotating fan wheels can cause injury! Before performing any work on the unit, ensure that it is
powered down. Ensure that the appropriate point of the unit for the on-site power supply is
secured against being switched back on.
2