Advertisement
Fan Coil Unit One-Way Cassette Type
-
Use the self-provided stiff pipe and clamp with unit. Insert water pipe into water plug until it
reaches the white tape. Tighten the clamp.
-
Wind the drain hose using seal pad for installation.
-
Insulate drain hose in the room.
-
Installation height shall be less than 280mm.
-
There should be a right angle with unit, 300mm from unit.
NOTE!
-
The slope of water drain hose shall be within 75mm, don't apply too much force on it.
-
If several water hoses join together, do as per following procedures.
-
Specifications of the selected drainage hoses shall meet the requirements for the unit running.
-
Check if water drainage is smooth after installation.
5.7 Electric Wiring
DANGER FROM ELECTRICAL CURRENT!
-
The electricity shall be disconnected before make any installation work.
-
The electrical installation of the fan coil units must only be carried out by qualified electricians
in observance of this operation manual.
-
The electrical connection of fan coil units must be performed in accordance with the valid
connection diagrams. The connection diagram is located on the back of the cover of the sheet
electric control box.
-
The earth point provided on the unit shall be connected to the grounding system of the
building.
-
All electric connections shall comply with local electric regulations.
-
The connection diagrams do not contain any protective measures. During connection, the
20
Advertisement
Troubleshooting
