Advertisement
Fan Coil Unit One-Way Cassette Type
standards and regulations currently in force must be observed and cleared with the local
electricity company.
5.7.2 Unit electric wiring
-
Please make the correct power supply connection according to the diagram located on the
back of the cover of the sheet electric control box. You can also refer to electric wiring diagram
in section 4.3
5.7.3 Panel electric wiring
Connect the swing motor cable/LED display cable to the PCB according to the diagram located
-
on the back of the cover of the sheet electric control box. You can also refer to electric wiring
diagram in section 4.3
NOTE!
-
Please make the correct wiring of motorized 2-way or 3-way valve and thermostats in
according to its installation instructions.
-
In case of installation with motorized valve, it is necessary to short-connect the
connection port S6 on unit PCB; (If no motorized valve, then S6 should be open/cut off)
21
Advertisement
Troubleshooting
