Advertisement
Fan Coil Unit One-Way Cassette Type
5. Installation
5.1 Checking and acceptance
Each fan coil is packaged in corrugated cartons to avoid damages during transportation, handling
and site placement. To make sure no damages occurred due to transportation, please follow below
steps to check upon receiving the equipment:
a) Before acceptance, please check if each unit shows any abnormal facts, if carton edges and
corners are in good conditions and if there are obvious carton damages;
b) For any obvious carton damages, please immediately unpack to inspect the unit itself. If the
unit is indeed damaged, please indicate on the receipt and refuse to accept. Please also
check accessories;
c)
Check hidden damages of the unit;
d) If any hidden damage is found, do not move the unit on the site. The receiver has the
obligation to evidence such damage does not occur after delivery. Meanwhile, please stop
unloading and take photos for reference;
e) If damages are found, please notify the carrier, and request the carrier and the receiver to
conduct a joint inspection;
f)
Do not repair it yourself before inspection and confirmation by the carrier representative has
been made;
g) After confirmation of damages, please contact related persons for replacement.
5.2 Transport
DAMAGE TO UNIT AND PERSONAL INJURY!
-
Use protective gloves to avoid injury due to sharp edges.
-
Ensure that at least two people carry the fan coil to avoid injury.
-
In case of deliveries on pallets, use only lifting and transport vehicles with sufficient carrying
capacity.
-
Secure the load during transit to prevent it from tipping or falling.
Grasp and transport the Cassette Fan Coil using the outer casing only. Refer to below fig.
14
Advertisement
Troubleshooting
