Options - Electrolux ESL 7220RO User Manual

28 www.electrolux.com
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
2. Press
• The indicators
• The indicator
• The end indicator indicates the
3. Press
setting.
End indicator off = the rinse aid dispenser
is deactivated.
4. Press the on/off button to confirm the
setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.

7. OPTIONS

7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
until the indicators
, and
.
go off.
to flash.
current setting: End indicator on =
the rinse aid dispenser is activated
(factory setting).
to change the
Desired options must be
activated every time before
you start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
and
signal for the end of programme
,
The appliance must be in programme
start to flash.
selection mode.
1. To enter the user mode, press and
, and
continues
2. Press
3. Press
End indicator on = Acoustic signal on.
4. Press the on/off button to confirm the
This option also deactivates the release of
rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
released even with the option Multitab
activated.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
hold simultaneously
until the indicators
, and
• The indicators
and go off.
• The indicator
flash.
• The end indicator indicates the
current setting: End indicator off =
Acoustic signal off.
to change the setting.
setting.
and
,
start to flash.
,
continues to