Electrolux ESL 7220RO User Manual page 27

How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
,
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The end indicator starts to flash.
The number of flashes indicates
the level.
– E.g. 5 flashes + pause + 5
flashes = level 5.
3. Press again and again to
change the setting. Each time you
press the level number
increases. After level 10 you will start
again from level 1.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and
,
and start to flash.
, and
continues to
and
until the indicators
,
2. Press .
• The indicators
and go off.
• The indicator
• The end indicator starts to flash.
The number of flashes indicates
the current setting: e.g. 4 flashes +
pause + 4 flashes = level 4.
– The levels of rinse aid are from
0 to 6.
– Level 0 = no rinse aid is
released. In this case the end
indicator remains off.
3. Press
again and again to change
the setting. Each time you press
the level increases. After level 6 you go
to level 0 and then start again from
level 1.
4. Press the on/off button to confirm the
setting.
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you do
not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
ENGLISH
,
and start to flash.
,
continues to flash.
27