Resuming Operation - Panasonic CF-28 Series Reference Manual

Standby/Hibernation Functions

Resuming Operation

Rotate the power switch
When [Standby]* or [Hibernate] is selected as the setting for [When I close the lid of
my portable computer], the computer will enter either the standby or hibernation mode
when the LCD panel is closed. Operation will resume when the LCD panel is opened.
Even if the display is closed after the computer has entered either the standby or
hibernation mode, operation will resume when the display is opened. If the computer
does not resume when the LCD panel is opened, slide the power switch.
* Windows XP : [Stand by]
CAUTION
After the display returns, the computer needs about 15 seconds to reinitialize.
Do not shut down or restart Windows, or enter either the standby or hiberna-
tion mode again during this time, as this may subsequently cause Windows
to operate abnormally.
When resuming operation, avoid the following:
• Touching the keyboard (except for password input), pointing device (touch
pad, touchscreen* external mouse, etc.), or power switch.
• Connecting or disconnect the AC adaptor.
• Closing or opening the display.
* Only for models with touchscreen
19