Panasonic CF-28 Series Reference Manual page 66

Dealing with Problems
Connecting Peripherals
The address map for IRQ,
I/O port address, etc. is
unclear
A USB device does not
work
It is not easy to hear of the
microphone sound
Disk Operations
Cannot read/write to a
floppy disk
Unable to write to a floppy
disk
How to format a floppy
disk is unclear
Unable to read/write to the
hard disk
When the previous item is
not the cause
Windows 2000
Check the address map by going to [View] - [Resources by type] in [Control Panel] -
[System] - [Hardware] - [Device Manager].
Windows XP
Check the address map by going to [View] - [Resources by type] in [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
Make sure a driver is installed.
Contact the manufacturer of the product.
1 Windows 2000
Select on the taskbar.
Windows XP
Select on the taskbar.
2 Select [Options] - [Properties].
3 Check [Playback] and then add the check mark
4 Select [Options] - [Advanced Controls].
5 Select [Advanced] in [Microphone].
6 Delete the check mark
7 Click in the top of right corner of the window.
Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Has the Setup Utility been used to set [Floppy Operation] to [Enable]? (
Your disk content may be corrupted.
Is the floppy disk write-enabled?
Windows 2000
Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the
disk volume and format type, start formatting.
Windows XP
Select [Format] in [Start] - [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming
the disk volume and format type, start formatting.
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
Your hard disk content may be corrupted. Contact Panasonic Technical Support.
Try testing another drive or media.
(Advanced)
for [Microphone], then select [OK].
for [Microphone Boost] and then select [Close].
Write-protect Tab
Write Enable
66
page 55)
Write Disable