Panasonic CF-28 Series Reference Manual page 35

Multimedia Pocket
Information for the Second Hard Disk Drive
Windows 2000
Refer to the Operating Instructions of the Second Hard Disk Drive Pack.
Windows XP
To format the second hard disk, perform the operation below.
1 Turn your computer on.
Be sure to log on with the administrator authority.
2 Select [Disk Management] in [Control Panel] - [Performance and Maintenance] -
[Administrative Tools] - [Computer Management] - [Storage].
3 When [Welcome to the Initialize and Convert Disk Wizard] is displayed, select
[Next].
4 At [Select Disks to Initialize], add the check mark for [Disk 1] and select [Next].
5 At [Select Disks to Convert], remove the check mark for [Disk 1] and then select
[Next].
6 Select [Finish].
7 Click the right side of [Disk 1] with the right button and select [New Partition].
Follow the on-screen instructions.
8 When the operation completes, be sure to select [Start] - [Turn off computer] and
restar t the computer before using the second hard disk.
When changing the partition (after First Time Operation)
CAUTION
When changing the partition, the contents of a hard disk drive are completely
erased.
Windows 2000
Refer to the Operating Instructions of the Second Hard Disk Drive Pack.
Windows XP
The partition can be changed in [Control Panel]- [Performance and Maintenance] -
[Administrative Tools] - [Computer Management] - [Storage] - [Disk Management].
35