Replacing The Battery Pack - Panasonic CF-28 Series Reference Manual

Battery Power

Replacing the Battery Pack

Cover
Label-side up
When the charge provided by your battery pack is supplied for only a short period of
time, even after fully charging according to the instructions, it may be time to replace
your battery pack. The battery pack is a consumable item and therefore will require
replacement (CF-VZSU18).
CAUTION
Do not touch the terminals on the battery pack. The battery pack may no longer
function properly if the contacts are dirty or damaged.
The battery pack is not charged when the computer is first purchased. Be sure to
charge it before using it for the first time. When the AC adaptor is connected to
the computer, charging begins automatically.
Use only the specified battery pack (CF-VZSU18) with your computer.
1
Power off your computer
Do not shut down using the standby function.
CAUTION
In the standby mode, do not remove/change the battery pack. Re-
moving the pack in the standby mode will erase your data and may
damage the computer.
2
Remove the cover
Turn your computer over and slide the latches inward.
Lift open the cover holding both sides and remove the cover.
Latch
Tab
3
Remove the battery pack
Lift the battery pack slightly by pulling the tab.
Hold the battery pack and remove it from the computer.
4
Insert the new battery pack
Insert the battery pack into the computer with the label-side up.
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not allow the battery connector to touch any portion of the
computer. The computer may not operate properly.
( "Starting Up/Shutting Down")
(To next page)
30