Panasonic CF-28 Series Reference Manual page 9

Touch Pad
(Advanced)
When you want to re-enable the touch pad and touchscreen (only
for models with touchscreen)
Windows 2000
1 Uninstall the driver or application software of an external mouse or trackball de-
vice. (Refer to the operating instructions of the external device on how to uninstall
the driver.)
If the explanation of uninstalling the driver or application software can not be found
in the operating instructions for the external device, execute the following steps.
In [Control Panel] - [System] - [Hardware] - [Device Manager], when an exter-
nal mouse or trackball device is displayed in [Mice and other pointing devices],
press Del to delete it and then select [OK] to confirm the deletion.
2 The display will ask you to restart Windows, select [No].
3 Power off your computer (
external mouse or trackball device.
4 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] (only for models with touchscreen) to [Enable].
5 Close the Setup Utility by pressing F10 . At the confirmation message, select
[Yes].
6 Log on to Windows by using the keyboard. (Up to step 9, use the keyboard for all
operations. The touch pad will not function until the computer restarts. Applica-
tions can be changed with Alt + Tab .)
7 At [Digital Signature Not Found] screen*, press Enter .
8 Press Enter to close the wizard screen*.
9 The display will ask you to restart Windows*, press
<Only for models with touchscreen>
10Perform the touchscreen calibration. (
* When the [Getting Started with Windows 2000] screen is displayed, these screens
will be displayed behind it. Press Enter one after another.
The [Digital Signature Not Found] screen in step
"Starting Up/Shutting Down") and remove the
page 52). In [Main] menu, set
Enter .
page 12)
6 might not be displayed.
9