Controls - Honda HRX537VYE Owner's Manual

CONTROLS

Fuel Valve
The fuel valve [1] opens and closes the connection between the fuel
tank and the carburetor.
Throttle Lever
The throttle lever [1] controls the following functions:
D
C
C
FAST For starting the engine and for mowing.
D
SLOW For idling the engine.
F
STOP For stopping the engine.
Blade Control System
Blade rotation is controlled
by the Roto-Stop button [1]
and the blade control lever
[2].
Hold the Roto-Stop button
down, and then pull the
blade control lever against
the handlebar to engage the
blade. Then release the
Roto-Stop button.
OFF
[1]
ON
STOP
[1]
[1]
[2]
Smart Drive Control
The Smart Drive control [1]
can be adjusted up or down
into any one of five
positions.
1. Slide the multi-position
adjuster [2] to the left to
unlock the control.
2. Move the Smart Drive
control up or down into
the position most
comfortable.
3. Release the multi-position adjuster and allow it to engage.
Do not attempt to adjust the position of the Smart Drive control while
the mower is in motion.
Cutting Height Adjustment Levers
There are seven
adjustment settings. The
cutting height figures are
approximate. The actual
height of cut grass will vary
with lawn and soil
conditions.
There is one adjustment
lever [1] for each wheel.
Clip Director Knob
The Clip Director knob [1]
controls bagging,
mulching, and rear
discharge. The knob has
ten adjustment positions.
ENGLISH
[2]
20 mm
32 mm
46 mm
62 mm
75 mm
88 mm
[1]
[1]
[1]
100 mm
5