Dispenser Lock - Kenmore 596.57002600 Use & Care Manual

Ice and Water

Dispenser Lock

The Dispenser Lock prevents ice or water from
being dispensed.
To Lock Dispenser:
• Press and hold the Lock button for three (3)
seconds. A green indicator light above the button will
illuminate when the dispenser is locked.
To Unlock Dispenser:
• Press and hold the Lock button for three (3)
seconds. The green indicator light above button will
go out.
Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four (4) seconds.
The green filter status indicator light will flash
three times when the function has
successfully reset.
Auto Light
(Models with Water Filter
Status Indicator Light on Dispenser)
The Auto Light function activates the dispenser
light at half-power when the Light Sensor detects that
the light levels in room are low.
To Activate Auto Light:
• Press Auto Light button. A green indicator light
above button illuminates when the sensor is active.
To Deactivate Auto Light:
• Press Auto Light button. The green indicator light
will go out.
Note:
The dispenser light will operate when Auto
Light is ON or OFF.
20
Light
Press the Light pad once to select the Auto Light
function which activates the dispenser light at half-
power when the light sensor detects that the light
levels in room are low. The Auto indicator light will
illuminate.
To Activate Light:
• Press the Light pad again to turn the dispenser light
on continuously. The On indicator light will
illuminate.
To Deactivate Light:
• Press the Light pad a third time to turn the dispenser
light off.
Sabbath Mode
(Models with Water Filter
Status Indicator Light on Dispenser)
When activated, the Sabbath Mode deactivates the
control lights while leaving the control operational.
To Activate Sabbath Mode:
• Press and hold the Lock and Auto Light
buttons simultaneously for three (3) to four (4)
seconds. After three to four seconds, the
dispenser lights will turn off.
To Deactivate Sabbath Mode:
• Press and hold both the Lock and Auto Light
buttons simultaneously for three (3) to four (4)
seconds. After three to four seconds, the dispenser
lights will activate.
Notes:
• Dispenser light will not activate during dispensing
while in this mode.
• If the power fails, the control will remain in
Sabbath Mode when power returns.
• Advanced Temperature Control models: see User
Preferences page 14.