Preparation and Setup
Your M.A.S. (P/N 1006-20) or H.A.B.D. (P/N 1028-00) has
been packaged fully assembled and is ready to use after it
has been filled with air. Before using it, however, it is very
important to carefully read and understand the procedures
outlined in this manual for filling the unit and performing a
pre-dive inspection.
NOTE: M.A.S. w/o Cylinder (P/N 1006-30) is sold indepen-
dent of a SCUBA cylinder, and will require final assembly and
preparation by an Authorized Aqua-Lung Dealer.
Your Authorized Aqua Lung Dealer can answer questions
you have pertaining to the information in this manual, and
demonstrate the correct filling procedure.
e. Holster
a. Fill Adapter
Micra Air System Owner's Manual 7
Fig. 1 - Component Identification
Aqua Lung International, Inc.
d. Cylinder
b. Second-stage
c. First-stage w/
Integrated Valve