Basic Setup - Aqua Lung 397094 User Manual

Powerline Inflator and Universal Pull Dump
The weather-proven Powerline inflator with rapid exhaust valve (REV) is in-
cluded on the BD. A universal pull dump is attached to the rear of both right /
left lower lobes and the upper right shoulder. The universal pull dump valves
give you an additional option of releasing air from the BC.
Drop Down Utility pocket
A drop down utility pocket (located on left side) provides additional space for
dive accessories such as lights, masks and emergency signaling devices. The
pocket can be rolled up when not in use. A secondary pocket is located on the
right side of the BD.
knife grommets
Located on the left side pocket are two knife grommets which can accommodate
an optional knife.
Self-Adjusting Lumbar Support (SLS)
The self-adjusting lumbar support system allows the diver to adjust the position
of the lumbar pad on the harness for maximum comfort.

BASiC SetUp

Aqua Lung recommends that you bring your buoyancy compensator, together
with your regulator, to your Authorized Aqua Lung Dealer or Distributor for
the installation of the MP inflator hose and other accessories. The retailer
can also answer any questions you may have pertaining to the information
in this manual.
NOTE: The terms "Hook & Loop" are used throughout this manual.
Hook & Loop is commonly known as Velcro®, which is a trademarked
brand of hook & loop. Some of the BC components have hook & loop
attachments, including the cylinder band, weight pouch flaps, pockets
and inflator hold down.
If it is not possible to return the BC with your regulator to your authorized
dealer, you may install the MP quick disconnect inflator hose by carefully
performing the steps in the following procedure.
BD BUOYANCY COMPENSATOR USER'S MANUAL
11