Changing The Seat Lift Adjustment Device; Removal - Permobil Chairman Robo PG8 Service Manual

Changing the seat lift
adjustment device
The procedure is the same for both
adjustment devices for the seat lift.

Removal

1. Raise the seat lift to its highest position.
2. Remove all covers. See page 8. Lower the
seat lift again.
3. Cut off the cable ties which hold the cables
to the adjustment device.
4. Disconnect the connections to the
adjustment device. Note how the cables are
attached.
5. Unscrew the rear bolt of the adjustment
device.
6. Unscrew the front bolt of the adjustment
device.
NB. Work on the left adjustment device is
facilitated if you manually push the chair
forwards. Check that no cables are too taut.
21
Changing the seat lift