Troubleshooting - Seat Issues - Vision Fitness R70-02 Service Manual

4.9 Troubleshooting – Seat Issues
1) See if the seat rollers are loose or mis-positioned. Adjust the roller to tighten the seat if needed:
a. Loosen the nuts putting tension on the roller brackets (Figure A).
b. Starting at the front set of brackets, use a screwdriver to leverage the roller bracket tightly so the chamfered roller is pushed toward the bottom
of the running track, and the flat roller is pushed towards the top of the running track (Figure B).
c. While holding pressure with the screwdriver, fully tighten the nut to hold the roller bracket in place (Figure C).
d. Once the front roller brackets are tight, repeat procedure with the rear roller brackets.
e. Once the roller brackets are tightened, test the seat movement for smooth travel. NOTE: If the seat sticks or is hard to move, the pressure on
the roller brackets may need to be loosened. If the seat is still wobbly or loose, the pressure on the roller brackets may need to be further
tightened.
2) If seat is still wobbly or loose once the roller brackets are tightened, replace the roller brackets.
FIGURE A
CHAPTER 4: TROUBLESHOOTING
SEAT WOBBLY OR LOOSE
FIGURE C
FIGURE B
19