Service Information - KYMCO Bet & Win 125 User Manual

13
. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK

SERVICE INFORMATION

GENERAL INSTRUCTIONS
• When working with gasoline, keep away from sparks and flames.
• Note the locations of O-rings when disassembling and replace them with new ones during
assembly.
• Before float chamber disassembly, drain the residual gasoline from the float chamber.
• Do not try to disassemble the auto bystarter.
• When assembling the vacuum chamber and air cut-off valve, be careful not to damage the
diaphragms.
• All cables, fuel lines and wires must be routed and secured at correct locations.
• When removing the fuel tank, keep sparks and flames away from the working area.
• When removing the fuel tank, the remaining fuel in the tank must be lower than _ of the fuel tank
capacity to avoid gasoline overflowing.
• Fuel tank capacity: 10.5 liters
SPECIFICATIONS
Venturi dia. (mm)
Identification number
Float level (mm)
Pilot screw opening
Main jet
Slow jet
Idle speed
Fuel pump output
SPECIAL TOOLS
Float level gauge
Fuel unit remover
13-5
125cc
VE0222 B
VE26
18.5
VE060A
2_ ±_
18.5
1 3/4
100#
35#
1600
17L/Hr/7000rpm
Bet & Win 125/150
150cc
35#
VE26
1500±100rpm
VE061A
40cc/1500rpm/10
18.5
seconds
1 3/4
100#
35#
1600
17L/Hr/7000rpm