A .C. Generator Inspection - KYMCO Bet & Win 125 User Manual

17
. IGNITION SYSTEM

A .C. GENERATOR INSPECTION

EXCITER COIL/PULSER COIL
INSPECTION
This test is performed with the stator
installed in the engine.
Remove the frame right cover. ( 2-4)
Disconnect the A.C. generator connector.
Measure the exciter coil resistance between
the black/red wire terminal and ground.
Black/red Ground
Measure the resistance in the XW range.
For A.C. generator removal/installation, refer
to pages 10-3 and 10-6.
Disconnect the pulser coil wire coupler.
Measure the pulser coil resistance between
the blue/white and green/white wire terminals.
Blue/white Green/white 50
50 250W
170W
Bet & Win 125/150
A.C. Generator Connector
Pulser Coil Wire Coupler
17-4