Hints On Usage - LauraStar Magic Evolution 723 User Manual

MagicEVO2-PreEVO2 Anglais

Hints on usage

Why have blowing and vacuum?
Perfect ironing requires steam to be injected into the fabric. This is a requirement for the complete
removal of creases. Do not continually inject steam into fabric: press the steam control button intermit-
tently. For this the LauraStar™ Magic Evolution / II system uses the same methods as professional dry
cleaning: vacuum and blowing.
To improve the quality of ironing and increase the autonomy of your appliance, steam iron the material first
and then re-iron it without steam, in order to dry the material.
Back
and collar and creases
•
blowing
vacuum
Angora / Wool
• Steam iron about 10 cm from the surface of the material, in order not to damage it.
• Shake the garment by hand so that it regains its normal shape.
Vertical removal of creases
Special materials
28.1.2003 10:16
Buttons Welt Legs Inside
and lining
•
• •
Hang the garment on a coat
hanger or hold it up.
With a sweeping movement from
top to bottom lightly touch the
material while giving short bursts
of steam.
Note: It is easy to remove creas-
es from most materials, except
for cotton, linen and some silks.
If it is difficult to remove the
creases from a material, iron it as
normal on the ironing board.
• Velvet
HOT
• Corduroy
• Jersey
Page 10
Sleeves Bottons Top
and collar
• • •
•
Silk
Steam iron silk in the normal
way.
In the case of dark silk you are
advised to use a Softpressing
soleplate.
If
Softpressing soleplate, steam
iron 2-3 cm from the surface of
the material, then finish by hand.
8
Pleats
• • • •
• •
you are not using a