Before You Begin - GE Coil Top Owner's Manual And Installation Instructions

Using the oven for broiling.
Appearance may vary.
OVEN TEMP
Bump
The oven has 4 shelf positions.
Clock and Timer
(on some models)
TIME Pad
Touch this pad to select the timer feature.
CLOCK Pad
Touch this pad before setting the clock.
Display
Shows the time of day and the time set for the timer, cook time or start time.
SET +/- Pads
These pads allow you to set the clock and timer.
Oven Temperature Knob
Turn this knob to the setting you want.
The oven cycling light glows until the oven
reaches your selected temperature, then goes
off and on with the oven element(s) during
cooking.

Before you begin...

To avoid possible burns, place the shelves in the
desired position before you turn the oven on.
The racks have stop-locks, so that when placed
correctly on the rack supports (A through E), they will
stop before coming completely out and will not tilt.
When placing and removing cookware, pull the rack
out to the bump on the rack support.
Oven Shelf Positions
B, C and D (top).
(on some models)
To remove a rack, pull it toward you, tilt the front
end up and pull it out.
To replace, place the end of the rack (stop-locks) on
the support, tilt up the front and push the rack in.
NOTE: The rack is not designed to slide out at the
special low rack (R) position.
A (bottom),
GEAppliances.com
11