Hydraulic Control Unit Use Reference Chart - Kubota B3300SU Operator's Manual

BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
Light soil
Moldboard plow Medium soil
heavy soil
---
Disc plow
Harrower (spike,
springtooth, disc
---
type)
Sub-soiler....
Weeder ridger..
Earthmover,
digger, scraper,
manure fork, rear
carrier....
---
Mower (mid-and
rear-mount type),
hayrake,
tedder....
Top link (1)Hydraulic
mounting holes control lever
(1) is standard.
(2) is used only
when there is
Hydraulic control
some obstacle
that prevents you
from using the
standard.
HYDRAULIC UNIT
Gauge (1)Check
Wheel chains
YES/NO Loose
YES
Tighten
YES/NO
33
Remarks
Adjust the check
chains so that the
implement can
move 5 to 6cm (2.0
to 2.4 in.) laterally.
For implements
with gauge wheels,
lower the
implements to the
ground.
Check chains
should be tight
enough to prevent
excessive
implement
movement when
implement is in
raised position.
For implements
with gauge wheels,
lower the
implements to the
ground.