Table of Contents
Advertisement
4. To connect WiFi-AP Solo from
another wireless station, make sure
that the IP address of the station is
within the same subnet as that of
the WiFi-AP Solo. For example, if
the IP address of the WiFi-AP Solo
is 192.168.0.1, then the IP address
of the station must be 192.168.0.X,
where X = 2 ~ 254. When the setup
is complete, click OK.
5. Click the Status button of the
setup utility to check whether the
connection is established.
Connecting WiFi-AP Solo to an existing Ad-hoc node
1. Open the setup utility and click
the Survey button to search for
available Ad-hoc nodes. Double-
click the Ad-hoc node you wish
to connect.
make sure
3-21
Advertisement
Table of Contents
