Setting Up Ap Mode - Asus E3060 WiFi-AP Solo User Manual

3.3.3 Setting up AP Mode

Open the setup utility by double-clicking the utility icon on the
desktop. The setup utility contains six buttons - Status, Config,
Survey, Statistics, Advanced and ICS in the left column. The
Survey button is greyed out in AP mode and the ICS button is
disabled when in the station mode.
1. Open the setup utility and click
Config button. Click the AP/
Station Mode switch button - To
Access Point Mode. The WiFi-
AP Solo is switched to AP mode
in several seconds.
2. Click ICS button to configure your
Internet connection which you
wish to share. Select the correct
connection and click Apply
button.
3. Click Config button and enter
the Network Monitor tab.
Click Setup button to enter the
Wireless Network Properties
page of the AP mode.
3-16