Table of Contents
Advertisement
3.5 Windows Zero Configuration
The Windows Zero Configuration is a wireless LAN service provided in
Microsoft Windows® XP. It provides basic and easy connection of the wireless
network. In this chapter, we introduce you the steps to swap between the
Windows Zero Configuration and the WiFi-AP Solo. If you prefer Windows Zero
Configuration instead through the WiFi-AP Solo, then you should follow the
steps in 3.5.1 to switch to Windows Zero Configuration. In addition, you could
rollback to WiFi-AP Solo by following the steps in 3.5.2.
3.5.1 Swap from WiFi-AP Solo to Windows Zero
Configuration
By default, the Windows Zero
Configuration is disabled after installing
the WiFi-AP Solo. You can enable it by
checking the Windows Zero Config
item on the global control bar. A dialog
box will appear. Click OK for swap
confirmation.
After opening your wireless network,
you will see this figure, which means
that the swap to Windows Zero
Configuration is successful. Otherwise,
repeat the steps previously given.
3-25
Advertisement
Table of Contents
