Table of Contents
Advertisement
2.1 Installation
2.1.1 System requirements
Before installing the WiFi-AP Solo drivers and utilities, make sure that your
system meets the following requirements.
•
ASUS motherboard with WiFi-AP Solo onboard solution
®
•
Intel
Pentium™ 4
•
Minimum 128MB system memory
•
Operating system: Windows
•
Optical drive for utilities and driver installation
2.1.2 Installing the antenna
The WiFi-AP Solo wireless solution comes with an omni-directional and
moveable antenna to maximize the WiFi-AP Solo coverage.
To install the antenna:
1. Locate the wireless LAN antenna
port on the motherboard rear
panel.
2. Connect the antenna twist-
on connector (female) to the
wireless LAN antenna port
(male).
3. Place the antenna at an elevated location to enhance your wireless LAN
coverage.
The antenna may differ depending on the model.
Do not place the antenna under your table or in a closed compartment.
2-2
®
2000/ XP/ XP-64bit/ Server 2003/
Server 2003 64-bit
Advertisement
Table of Contents
