Copier Features - Lanier 5515 Operator's Manual

Copier Features

Menu
1. APS.Auto R/E
2. Max.Copy Q'ty
3. Adjust Orig. Mode
4. Set Ratio
5. Copy Reset Timer
6. SADF Auto Reset
7. R.Sort Aut.Cont
8. Orientation
9. Sort
12. Key Op.Tools
If the machine is set to use the User Code function, operators must input their user codes
before the machine can operate. The machine can keep count of the number of copies
made under each user code.
User Tools Settings
Description
You can select Auto Paper Select or Auto R/E Priority.
When you cancel this setting, select "No".
Default: Auto Paper Select
The maximum copy quantity can be set between 1 and 99.
Default: 99
You can adjust the quality level of copies for each of the
original types. As a default setting, Text is selected as
original type. You can change it to Photo.
Default: Text
Select which Reduce, Enlarge, or Input Ratio is shown on
the panel display with priority when the Reduce/ Enlarge
key is pressed.
Default: 50%
The machine returns to its initial condition automatically
after your job is finished. The time can be set from 10 to
999 seconds, or Off.
Default: On / 60 sec.
When you set one original at a time in the optional
document feeder, the message is displayed. It shows the
document feeder is ready for another original. You can
adjust this time from 3 seconds to 99 seconds in 1 second
steps.
Default: 4 seconds
If you select "Off" when the paper tray in use runs out of
paper, the machine stops allowing you to add paper to the
tray so you can have all the copies rotate-sorted.
Default: Off
You can select the paper orientation ("Top to Top" or "Top
to Bottom").
Default: Off
You can select a Sort function.
Default: Rotate Sort
Copier Feature Settings
5 - 7