Copier Feature Settings; Basic Steps To Accessing Copier Feature Settings; Exiting From User Tools - Lanier 5515 Operator's Manual

Copier Feature Settings

Copier Feature Settings

Basic Steps to Accessing Copier Feature Settings

Step
1
2
3
4
5
6
The tables on the following pages provide you with information necessary to access the System
Settings

Exiting from User Tools

5 - 6
Procedure to Perform
Press the User Tools key.
Press the Cursor keys until "3 Copier Features" is displayed
Press the Cursor keys until the desired menu is displayed.
• APS, Auto R/E
• Max. Copy Q'ty
• Adjust Orig Mode
• Set Ratio
• Copy Reset Timer
• SADF Auto Reset
• R. Sort Auto Cont.
• Orig. Orientation
• Sort
• Key Op. Tools
Search for the desired setting using the Cursor keys.
Change settings by following the instructions on the panel display.
Press the OK key.
•
You can exit the User Tools mode by pressing the Cancel key.
•
If you want to return to copy mode, press the User Tools key.
•
The settings are not canceled even if the power switch is turned off or the Clear Modes
key is pressed.
User Tools Settings