How To Wall Mount Or Use The Table Stand (Remote Unit); How To Wall Mount Or Use The Table Stand (Main Unit); How To Reset The Unit - Oregon Scientific BAR898HG User Manual

HOW TO WALL MOUNT OR USE THE
TABLE STAND (REMOTE UNIT)
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Wall-Mount:
HOW TO WALL MOUNT OR USE THE
TABLE STAND (MAIN UNIT)
The unit can be wall-mounted using its recessed screw holes or
placed on a flat surface using the detachable table stand.
BAR898 Eng 20-12-02
Table-Stand:
12
12
Wall-Mount: Table-Stand:
Gently plug in the table stand
as shown:

HOW TO RESET THE UNIT

The [ RESET ] button allows you to return all settings to factory
values. Accessing the slot is required only when the unit is not
operating in a favorable way such as in the rare case of a
malfunction.
The [ RESET ] slot is located inside the battery compartment
door. To use the button:
1. Open the battery compartment door.
2. Place a blunt stylus into the hole and press.
3. Close the battery compartment door.
3/2/03, 11:04 am