Back View; Table Stand And Wall Mount - Oregon Scientific BAR916HG User Manual

BACK VIEW

1
2
3
4
1. mb / inHg switch (in battery compartment)
2. RESET button (in battery compartment)
3. °C / °F switch (in battery compartment)
4. Battery compartment (cover open)
5. Wall mount holes
6. Lock button -place the 2 parts of the unit next to
each other, as shown opposite. Twist the lock
button to secure the 2 unit parts together. Twist it
anti-clockwise to release the lock and separate the
two segments.
BAR916HG_EN_OP.indd 5

TABLE STAND AND WALL MOUNT

To stand the unit on a table, twist the lock button (on
5
the back of the unit) so that the two main unit segments
are unlocked from each other. Then position the unit
as shown below.
6
To mount the unit on a wall, twist the lock button (on
the back of the unit) so that it locks the two segments
together. Then mount as shown below.
5
5/8/06 11:21:54 AM