Table of Contents
Advertisement
HOW TO CHECK THE BAROMETRIC
PRESSURE
The current and historical barometric pressure is shown on the
atmospheric pressure window.
For users staying at a higher altitude such as in the mountain area,
sea-level barometric pressure applies. In this case, press and hold
[HISTORY] button to enter the altitude compensation setting
mode. Use the UP (+) or DOWN (-) button to select from –100 to
2500 meters (whichever appropriate). Press [HISTORY] button to
confirm and exit.
The atmospheric pressure can be displayed in mb/hPa or inHg. The
pressure unit is selected on the atmospheric pressure slide switch
inside the battery compartment.
If you want to check the pressure history for a particular hour
during the past 24 hours, press the [HISTORY] button. Each press
on the button will go back by an hour. Holding down the button
will increase the value rapidly.
LOW BATTERY INDICATION
When it is time to replace batteries, the respective low battery
indicator [
] will show up when the corresponding channel is
selected. The battery level of the main unit is shown on the Weather
Forecast Window when it is running low.
913hg-e.p65
10
HOW TO WALL MOUNT OR USE THE
TABLE STAND (REMOTE UNIT)
The unit can be wall-mounted using its recessed screw holes or
place on a flat surface using the fold out table stand.
Wall-mount
Table stand
HOW TO WALL MOUNT OR USE THE
TABLE STAND (MAIN UNIT)
The unit can be wall-mounted using its recessed screw holes or
placed on a flat surface using the collapsible table stand. Gently
pull the table stand from it's collapsed position. Position the lock
to secure the stand.
Wall-mount
Table stand
10
07/12/2001, 3:06 PM
Advertisement
Table of Contents
