Camera Setup - Kenwood DNX892 Quick Start Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Press the
volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
Rear Camera*
1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
102 102
<MENU> button/
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse.
Or pressing the <MENU>
button for 1 second.
OFF (Default):
the rear view camera video display when
pressing the <MENU> button for 1 second.
R-CAM Settings*
2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Parking Guidelines*
3
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
Guideline Setup*
3
Adjust the parking guidelines. See
the parking guidelines
Front Camera*
1
Selects the type of front camera to use.
CMOS-3xx: When the CMOS-300 series with ID
2 set is connected.
Other: When the other camera is connected.
OFF (Default): When the front camera is not
used.
F-CAM Settings*
4
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 This setting becomes settable only when
the "Rear Camera" is set to [Other].
*4 This setting becomes settable only
when the parking brake is on and "Front
Camera" is set to CMOS-300 series.
Switches to
Adjusting
(P.103).