Zone Control - Kenwood DNX892 Quick Start Manual

Return to the Top page
Controlling Audio

Zone Control

You can select different sources for both
front and rear positions in the vehicle.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Zone Control].
Zone Control screen appears.
4
Touch [Dual Zone].
5
Set each source as follows.
[D] (Front Source, Rear Source)
Select the audio source for each.
112 112
<MENU> button/
[S], [R] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost
– Equalizer Control/ Sound Effect/ Listening
(P.110, 113, 115)
Position
– DSP Bypass Control/ Speaker Setup/ Car Type
(P.109, 107, 108)
Setup
• Different sources from iPod/iPhone (apps) cannot
be set as front source and rear source separately.
Only one source (app) can be set as front and
rear sources.
(P.110)